Salta al contenuto principale

Introduzione

Pre-req only

Ricambi

Nessuna parte specificata.

  1. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  2. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Brett Hartt

Membro da: 12/04/2010

122.751 Reputazione

143 Guide realizzate

Team

iFixit Membro di iFixit

Community

138 Membri

15.634 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 460