Salta al contenuto principale

Introduzione

Having connectivity issues? Use this guide to replace the AirPort board.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  5. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.
    • Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.

  7. Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board. Grasp the edges of the board and slide it out from its connector.
    • Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board.

    • Grasp the edges of the board and slide it out from its connector.

    • Lift and remove the AirPort board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Team

iFixit Membro di iFixit

Community

99 Membri

9.289 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 111

Tutti i Tempi: 8,821