Introduzione
This connects the left I/O board to the logic board.
Cosa ti serve
-
-
Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.
-
-
-
Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.
-
-
-
-
Disconnect the iSight cable from the logic board by sliding the cable to the left and out of its connector.
-
-
-
Disconnect the hard drive and ExpressCard connectors from the left side of the logic board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.