Aggiusta la tua roba Comunità Store

MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement

Introduzione

Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.

Cosa ti serve

  1. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Remove the lower case screws: passo 1, immagine 1 di 1

    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

    Traduci

  3. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Lift the lower case away: passo 2, immagine 1 di 1

    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 43 persone hanno completato questa guida.

Un commento

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.

glaubitz - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 35

Tutti i Tempi: 39,091