Salta al contenuto principale

MacBook Pro 13" Unibody Early 2011 Lower Case Replacement

Cosa ti serve

  1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement, Lower Case: passo 1, immagine 1 di 1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: passo 2, immagine 1 di 2 MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: passo 2, immagine 2 di 2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 60 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 74

Tutti i Tempi: 35,867