Salta al contenuto principale

MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement, Battery Connector: passo 1, immagine 1 di 1
    • Remove the plastic cover adhered to the battery contact board.

  2. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 2, immagine 1 di 1
    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

  3. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 3, immagine 1 di 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 3, immagine 2 di 2
    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

  4. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 4, immagine 1 di 1
    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

  5. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 5, immagine 1 di 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: passo 5, immagine 2 di 2
    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 251