Aggiusta la tua roba Comunità Store

MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement

Introduzione

This serves as the starting point for every guide—you'll need a P5 Pentalobe screwdriver to remove the lower case and get into the device.

Cosa ti serve

  1. MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement, Lower Case: passo 1, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Magnetic Project Mat
    $19.95
    Compra

    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

    Modifica

  3. MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement: passo 2, immagine 1 di 1

    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case to remove it.

    Modifica

  4. MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement: passo 3, immagine 1 di 2 MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement: passo 3, immagine 2 di 2

    • The lower case is connected to the upper case with two plastic clips near its center.

    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 27 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Andrew Optimus Goldheart

Membro da: 10/17/09

502.825 Reputazione

407 Guide realizzate

Distintivi: 44

+41 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

5 Commenti

Nice………………..!

Fred Starbuck - Replica

The bottom left-middle screw on my case is jammed and won’t come out—the more I try, the more I’m stripping it. Every other screw has been removed successfully, several times, with no problems. I wonder if I put in the wrong screw from somewhere else? Any ideas for removing it?

Jordan - Replica

do i get a laptop cover for mac book pro retina a 1502 model

naga usha - Replica

do i get a macbook pro retina A 1502 MODEL laptop cover (hard or soft shell)

naga usha - Replica

I’m trying to install my lower case back but it’s refusing to clip back in. Any way I can fix it?

Jorge Ramirez-Centeno - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 63

Ultimi 30 Giorni: 341

Tutti i Tempi: 50,674