Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This cover keeps the RAM levers out of the way of the battery and secures the hard drive. If you got a little overzealous and broke yours, here's how to replace it.
Cosa ti serve
-
-
Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
-
-
-
-
Remove the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 17 persone hanno completato questa guida.