Aggiusta la tua roba Comunità Store

MacBook Core 2 Duo Hard Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

How to remove the hard drive, along with its cable and bracket from your computer.

Cosa ti serve

  1. MacBook Core 2 Duo Hard Drive Replacement, Battery: passo 1, immagine 1 di 1

    • Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.

    Traduci

  2. MacBook Core 2 Duo Hard Drive Replacement: passo 2, immagine 1 di 1

    • Lift the battery out of the computer.

    Traduci

  4. MacBook Core 2 Duo Hard Drive Replacement, Memory Cover: passo 3, immagine 1 di 1

    • Unscrew the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

    • The screws are captive to the metal memory cover so you cannot lose them.

    • Using The Flexible Extension sold by iFixit will help with this step.

    Traduci

  5. MacBook Core 2 Duo Hard Drive Replacement: passo 4, immagine 1 di 1

    • Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.

    • Lift the memory cover up and out of the computer.

    Traduci

  6. MacBook Core 2 Duo Hard Drive Replacement, Hard Drive: passo 5, immagine 1 di 1

    • Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.

    • The hard drive goes back into its compartment with the label facing down.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

iRobot

Membro da: 09/24/09

1 Reputazione

636 Guide realizzate

Distintivi: 36

+33 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 7,448