Salta al contenuto principale

Introduzione

Prerequisite-only guide to replace the trackpad cable in a 2019 MacBook Air.

  1. Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.
    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.

  2. Use the flat end of a spudger to lift the small locking flap on the trackpad ZIF connector. Slide the trackpad cable straight out of its connector. Slide the trackpad cable straight out of its connector.
    • Use the flat end of a spudger to lift the small locking flap on the trackpad ZIF connector.

    • Slide the trackpad cable straight out of its connector.

  3. Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the battery. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer. Be careful not to overheat the battery.
    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the battery.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer. Be careful not to overheat the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Membro da: 11/04/2015

149.717 Reputazione

418 Guide realizzate

Team

iFixit Membro di iFixit

Community

138 Membri

15.634 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 42