Introduzione

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.

    • Remove the following ten screws:

      • Two 9 mm P5 Pentalobe screws

      • Eight 2.6 mm P5 Pentalobe screws

    • The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found here.

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

Andrew Optimus Goldberg

Membro da: 17/10/2009

399.535 Reputazione

412 Guide realizzate

Team

iFixit Membro di iFixit

Community

108 Membri

7.550 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 58

Tutti i Tempi: 8,451