Salta al contenuto principale

Introduzione

Prereq to disconnect the battery.

Parti

Nessuna parte specificata.

  1. In this step you will disconnect the battery to help avoid shorting out any components during service. Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.
    • In this step you will disconnect the battery to help avoid shorting out any components during service.

    • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

    • Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro da: 18/10/2012

389.745 Reputazione

545 Guide realizzate

Team

iFixit Membro di iFixit

Community

108 Membri

9.536 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 34