Aggiusta la tua roba Comunità Store

MacBook Air 11" Mid 2011 I/O Board Cable Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Internal Prereq for when the solid-state drive is removed.

Cosa ti serve

  1. MacBook Air 11" Mid 2011 I/O Board Cable Replacement, I/O Board Cable: passo 1, immagine 1 di 1

    • Use the flat end of a spudger to pry the I/O board cable up from its socket on the I/O board.

    Traduci

  3. MacBook Air 11" Mid 2011 I/O Board Cable Replacement: passo 2, immagine 1 di 1

    • Peel the I/O board cable up from the adhesive securing it to the fan.

    Traduci

  4. MacBook Air 11" Mid 2011 I/O Board Cable Replacement: passo 3, immagine 1 di 2 MacBook Air 11" Mid 2011 I/O Board Cable Replacement: passo 3, immagine 2 di 2

    • Use the flat end of a spudger to lift the I/O board connector up and out of its socket on the logic board

    • Be sure to lift straight up on the connector as you disconnect it from its socket. The socket is very deep on the logic board and prying it from side to side may damage the logic board

    • Remove the I/O board cable.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 980