Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Internal prerequisite.
Cosa ti serve
-
-
Disconnect the I/O board by pulling the power cable away from its socket on the logic board.
-
-
-
-
Gently push the tip of a spudger under the black plastic flap stuck to the display data cable lock to make the lock pop upward and away from the socket.
-
While holding the lock away from the socket, use the tip of a spudger and your fingers to gently remove the display data cable from its socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.