Salta al contenuto principale

Mac Pro 2009-2012 RAM Replacement

Cosa ti serve

  1. Mac Pro 2009-2012 RAM Replacement, Remove the side panel: passo 1, immagine 1 di 2 Mac Pro 2009-2012 RAM Replacement, Remove the side panel: passo 1, immagine 2 di 2
    • Lift the latch at the back of the computer

    • Lift the side panel

  2. Mac Pro 2009-2012 RAM Replacement, Remove the Processor Board: passo 2, immagine 1 di 2 Mac Pro 2009-2012 RAM Replacement, Remove the Processor Board: passo 2, immagine 2 di 2
    • Press both latches to unlock the bracket and then pull it towards you

    • Press where you see the circles

    • You shouldn't need to apply much force.

    • Push the RAM tabs down to release the RAM

    • When reinstalling the RAM it will take some force to install it properly!

    • Repeat this step for each stick of RAM you want to replace.

  3. Mac Pro 2009-2012 RAM Replacement: passo 4, immagine 1 di 1
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ben Capehart

Membro da: 06/09/21

7.277 Reputazione

18 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

322 Membri

2.506 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 81

Tutti i Tempi: 1,802