Introduzione
Prerequisite only.
Cosa ti serve
-
-
Remove the 2.6 mm T6 screw securing the SATA cable connector bracket.
-
-
-
Attrezzo utilizzato in questo passaggio:Mac mini Logic Board Removal Tool$4.99
-
Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure the rods make contact with the case under the logic board before proceeding.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.