Salta al contenuto principale

Introduzione

Prerequisite only

Ricambi

Nessuna parte specificata.

  1. Remove the two 12 mm T6 screws from the fan.
    • Remove the two 12 mm T6 screws from the fan.

    • Loosen the 27 mm T6 captive screw.

  2. The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved. Do not attempt to remove the fan entirely. Lift the fan straight up to free the captive screw from its hole in the logic board.
    • The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved.

    • Do not attempt to remove the fan entirely.

    • Lift the fan straight up to free the captive screw from its hole in the logic board.

    • Pull the fan away from the SSD until you can easily access the fan connector.

  3. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.
    • Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.

  4. Remove the fan from the Mac mini.
    • Remove the fan from the Mac mini.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro da: 18/10/2012

442.300 Reputazione

547 Guide realizzate

Team

iFixit Membro di iFixit

Community

138 Membri

16.998 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 188