Salta al contenuto principale

MSI VR601 WiFi card Replacement

Cosa ti serve

  1. MSI VR601 WiFi card Replacement, Open the back cover: passo 1, immagine 1 di 2 MSI VR601 WiFi card Replacement, Open the back cover: passo 1, immagine 2 di 2
    • Start by taking out the battery and charger. No power should be connected.

    • Unscrew the 4 Phillips #1 screws marked in the photo.

    • This screw is hidden under the Warranty void sticker!

    • All screws are the same length, so don't worry about mixing them up

    • Use a spudger or your finger to gently but firmly open the cover.

    • It's stuck in there with clips, so be a little careful. (Remember; If you feel like you're using too much force, you probably are).

  2. MSI VR601 WiFi card Replacement, Identify the WiFi card and remove: passo 2, immagine 1 di 2 MSI VR601 WiFi card Replacement, Identify the WiFi card and remove: passo 2, immagine 2 di 2
    • The WiFi card has two antenna cables (one white and one black).

    • Use a spudger to carefully unhook the antenna contacts.

    • Unscrew the Phillips #0 screw holding the WiFi card down. (This is not the same screw as the others).

  3. MSI VR601 WiFi card Replacement, Replace WiFi card: passo 3, immagine 1 di 1
    • Take the old card out of the mini PCI Express slot, and replace with a new and compatible card.

    • In my case I only had a direct replacement, which only supports 802.11b/g standards.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Master Techs Membro di Master Techs

Community

326 Membri

1.670 Guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 30

Tutti i Tempi: 344