MSI GP62MVR 6RF Leopard Pro Fans Replacement

Introduzione

This guide demonstrates how to replace the fans in the MSI GP62MVR 6RF Leopard Pro laptop. It is a difficult process with no special skills required. Avoid touching the circuitry when the case is open to avoid short-circuiting components or shocking yourself. If your fans are not turning on or are turning slow, and the laptop is overheating, then the fans will need to be replaced. Follow this guide to change the fans in a MSI GP62MVR 6RF Leopard Pro.

Cosa ti serve

Passo 1 Bottom Cover

MSI GP62MVR 6RF Leopard Pro Fans Replacement, Bottom Cover: passo 1, immagine 1 di 2

MSI GP62MVR 6RF Leopard Pro Fans Replacement, Bottom Cover: passo 1, immagine 2 di 2

Place the laptop upside down.
Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.

Modifica

Passo 2

Use the Jimmy tool to evenly pry loose the bottom cover.
Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.

Modifica

Passo 3

Remove the back cover.
Touching circuitry could damage components or result in personal shock; it is recommended that you now wear latex gloves to prevent both issues.

Modifica

Passo 4 Fans

MSI GP62MVR 6RF Leopard Pro Fans Replacement, Fans: passo 4, immagine 1 di 2

MSI GP62MVR 6RF Leopard Pro Fans Replacement, Fans: passo 4, immagine 2 di 2

Remove the eight 4.5 mm screws that hold the heat sink to the motherboard with a Phillips #0 screwdriver.
Remove the four 4.5 mm screws holding the fan in place also using a Phillips #0 screwdriver.
Watch for the screw hidden under the wires highlighted in the second picture.