Aggiusta la tua roba Comunità Store

MSI GP60 2PE Leopard Wireless Card Replacement

Introduzione

Is your wireless card not working? Here's a guide to replace it. Make sure you follow each step accordingly and carefully replace the wireless card.

Cosa ti serve

  1. MSI GP60 2PE Leopard Wireless Card Replacement, Battery: passo 1, immagine 1 di 1

    • Flip MSI GP60 2PE Leopard, so that the back is facing up.

    Traduci

  2. MSI GP60 2PE Leopard Wireless Card Replacement: passo 2, immagine 1 di 1

    • Find the unlock tab located on the upper right side of the device, then slide it to the right.

    Traduci

  3. MSI GP60 2PE Leopard Wireless Card Replacement: passo 3, immagine 1 di 3 MSI GP60 2PE Leopard Wireless Card Replacement: passo 3, immagine 2 di 3 MSI GP60 2PE Leopard Wireless Card Replacement: passo 3, immagine 3 di 3

    • Slide and hold the release tab on the left side of the battery, so that you can remove the battery.

    Traduci

  4. MSI GP60 2PE Leopard Wireless Card Replacement: passo 4, immagine 1 di 3 MSI GP60 2PE Leopard Wireless Card Replacement: passo 4, immagine 2 di 3 MSI GP60 2PE Leopard Wireless Card Replacement: passo 4, immagine 3 di 3

    • While holding the release tab, remove the battery slowly.

    Traduci

  6. MSI GP60 2PE Leopard Wireless Card Replacement, Back Panel: passo 5, immagine 1 di 1

    • Flip the device over so the back is facing up.

    Traduci

  7. MSI GP60 2PE Leopard Wireless Card Replacement: passo 6, immagine 1 di 2 MSI GP60 2PE Leopard Wireless Card Replacement: passo 6, immagine 2 di 2

    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

    Traduci

  8. MSI GP60 2PE Leopard Wireless Card Replacement: passo 7, immagine 1 di 2 MSI GP60 2PE Leopard Wireless Card Replacement: passo 7, immagine 2 di 2

    • Once all four screws are removed, lift the back off.

    Traduci

  9. MSI GP60 2PE Leopard Wireless Card Replacement, Wireless Card: passo 8, immagine 1 di 1

    • Locate the wireless card.

    Traduci

  10. MSI GP60 2PE Leopard Wireless Card Replacement: passo 9, immagine 1 di 1

    • Using a Phillips #00 screwdriver, remove the one 2 mm screw that is holding the wireless card in place.

    Traduci

  11. MSI GP60 2PE Leopard Wireless Card Replacement: passo 10, immagine 1 di 1

    • Carefully remove the wireless card.

    • Pay close attention to the two wires attached to wireless card.

    Traduci

  12. MSI GP60 2PE Leopard Wireless Card Replacement: passo 11, immagine 1 di 2 MSI GP60 2PE Leopard Wireless Card Replacement: passo 11, immagine 2 di 2

    • Remove the wires connecting to the wireless card by pinching around the base where they connect, then carefully disconnect them.

    • The wires should come off fairly easily.

    • Avoid yanking or pulling too hard. This can result in the wires breaking.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,311