Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip MSI GP60 2PE Leopard, so that the back is facing up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Find the unlock tab located on the upper right side of the device, then slide it to the right.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the release tab, remove the battery slowly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the device over so the back is facing up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once all four screws are removed, lift the back off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press the tabs on the side of the RAM to remove it.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.