Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips screwdriver to remove the three screws along the edge of the optical drive bay.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your fingers, gently loosen the edges of all four sides of the back cover.
-
Gently pull off the back cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the single 5.5mm Phillips #1 screw attaching the SSD to the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull out the SSD by gently wiggling it from side to side until it comes out.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.