Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips screwdriver to remove the three screws along the edge of the optical drive bay.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your fingers, gently loosen the edges of all four sides of the back cover.
-
Gently pull off the back cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully slide the Optical Drive off of the SATA connector.
-
The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
2 Commenti
So you don’t have power running through it while working on it.