Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    • Make sure the laptop is off and unplugged (not charging).

    • With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Slide the optical drive out of the laptop.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Use a Phillips screwdriver to remove the three screws along the edge of the optical drive bay.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 2 : passo 4, immagine 2 di 2
    • Using your fingers, gently loosen the edges of all four sides of the back cover.

    • Gently pull off the back cover.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 2 : passo 5, immagine 2 di 2
    • Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 6, immagine 1 di 2 : passo 6, immagine 2 di 2
    • Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.

Linea Traguardo

Altre 5 persone hanno completato questa guida.

Hovik Aklyan

Membro da: 04/19/17

233 Reputazione

1 Guida realizzata

4 Commenti

hi there, can we use the laptop without the battery attached? i mean using only the power adaptor straight through the electric plug

San - Replica

yes you can, might drop bit of performance if you have Hybrid power management on, buyed my laptop used its 4 years old now and was used 2 years, dont even checked used battery but removed it and using AC power, just after a while gonna need to replace vents…

also cooling is problem in summers, cut-off some plastics and using cooling pad (recommending with 3+ vents or good airflow)

Ivars Kemers -

Faut démonter TOUTES les vis ??? Je vais en perdre la moitié !

Bravo!! plus simple c’était pas possibles?

Dire qu’avant on avait une trappe coulissante d’acces (DELL) ..

Bruno R - Replica

Les PC portables MSI ne sont pas les pire à réparer, loin de là !

Par expérience, l’étape la plus délicate c’est d’arriver à enlever le capot car il est maintenu par des clips en plastique, après on a accès à pratiquement toutes les pièces sur ce modèle.

Aujourd’hui, les PC portables avec une trappe coulissante existent toujours, mais ils sont cher :)

Brendan -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 71

Tutti i Tempi: 10,180