Salta al contenuto principale

MAGNAVOX MDV2300 Power Cord Replacement

Cosa ti serve

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: passo 1, immagine 1 di 1
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: passo 2, immagine 1 di 1
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: passo 3, immagine 1 di 1
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: passo 4, immagine 1 di 1
  5. MAGNAVOX MDV2300 Power Cord Replacement: passo 5, immagine 1 di 2 MAGNAVOX MDV2300 Power Cord Replacement: passo 5, immagine 2 di 2
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: passo 6, immagine 1 di 1
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: passo 7, immagine 1 di 1
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Conclusione

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Justin

Membro da: 01/21/15

298 Reputazione

2 Guide realizzate

Team

Penn State, Team 1-41, Kaschak Winter 2015 Membro di Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

4 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 508