Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

MACTREM Camera Tripod Leg Locking Hinge Replacement

Cosa ti serve

  1. MACTREM Camera Tripod Leg Locking Hinge Replacement, Leg Locking Hinge: passo 1, immagine 1 di 1
    • Clean the leg that's damaged/needs maintenance.

  2. MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 2, immagine 1 di 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 2, immagine 2 di 2
    • Extend the part of the leg you will replace and/or clean.

  3. MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 3, immagine 1 di 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 3, immagine 2 di 2
    • Use the center punch and hammer to tap the pin out of the locking mechanism hinge.

    • Remove the locking mechanism lever.

  4. MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 4, immagine 1 di 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 4, immagine 2 di 2
    • Remove the leg piece from the main body.

  5. MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 5, immagine 1 di 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 5, immagine 2 di 2
    • Use the center punch and hammer to tap the pin out of the locking hinge on the opposite side of the damaged leg.

    • Remove the lever from the locking mechanism.

  6. MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 6, immagine 1 di 2 MACTREM Camera Tripod Leg Locking Hinge Replacement: passo 6, immagine 2 di 2
    • Slide the locking hinge off the broken leg.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 21

Ultimi 30 Giorni: 53

Tutti i Tempi: 236