M3D Micro Frame Removal

Introduzione

This guide serves as a prerequisite guide for replacing the z axis motor, the motors and ports. It shows how to remove the frame so these parts can be replaced.

Passo 1 M3D Micro Frame Removal

M3D Micro Frame Removal, M3D Micro Frame Removal: passo 1, immagine 1 di 1

Removing the frame is necessary to access the z axis belt, motors and ports. Make sure the unit is unplugged and set on a hard level surface.

Modifica

Passo 2

M3D Micro Frame Removal: passo 2, immagine 3 di 3

Pull the x-rods away from the plastic sliders on the y-rods, and flip the slider upwards to release the tracks. Lift the extruder assembly out of the way.

Modifica

Passo 3

No tools are required to remove the frame. Press down on the printing bed with your thumbs while lifting the frame with your fingers. The frame easily slides up.

Modifica