Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the bulb screws on either side of the silver plate.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the light bulb from the projector by lifting the silver handle and pulling up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a new Q-tip to clean the fan blades and hole in which the light enters.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Dispose of the bulb by sending it to a recycling center.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Un commento
Thanks for your guide provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector , how to projector Epson, is it same? because i have rental LCD Projector, definitely one day need