Aggiusta la tua roba Comunità Store

Lumen Projector Bulb Replacement

Introduzione

This guide will provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector. In the process of this removal, it will be demonstrated how to clean the area of any dust and how to recycle the waste material- old light bulb.

Cosa ti serve

  1. Lumen Projector Bulb Replacement, Unplug projector: passo 1, immagine 1 di 1

    • Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.

    Modifica

  2. Lumen Projector Bulb Replacement: passo 2, immagine 1 di 1

    • On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.

    Modifica

  3. Lumen Projector Bulb Replacement: passo 3, immagine 1 di 1

    • Unscrew the bulb screws on either side of the silver plate.

    Modifica

  5. Lumen Projector Bulb Replacement: passo 4, immagine 1 di 1

    • Remove the light bulb from the projector by lifting the silver handle and pulling up.

    Modifica

  6. Lumen Projector Bulb Replacement: passo 5, immagine 1 di 1

    • Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.

    Modifica

  7. Lumen Projector Bulb Replacement: passo 6, immagine 1 di 1

    • Use a new Q-tip to clean the fan blades and hole in which the light enters.

    Modifica

  8. Lumen Projector Bulb Replacement: passo 7, immagine 1 di 1

    • Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.

    Modifica

  9. Lumen Projector Bulb Replacement: passo 8, immagine 1 di 1

    • Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.

    Modifica

  10. Lumen Projector Bulb Replacement: passo 9, immagine 1 di 1

    • Dispose of the bulb by sending it to a recycling center.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Desiree Benitez

Membro da: 01/21/17

128 Reputazione

1 Guida realizzata

Distintivi: 3

Team

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 Membro di USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017

USFSM-STEWART-S17S1G1

19 Membri

19 Guide realizzate

Un commento

Thanks for your guide provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector , how to projector Epson, is it same? because i have rental LCD Projector, definitely one day need

ericserianto - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 759