Introduzione

This guide shows how to remove the battery cover and battery of this device. It shows the location of the screw and where to insert the spudger.

  1. Remove the 5.0mm screw using the Phillips #0 head screwdriver.
    • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

    Aggiungi Commento

  2. Insert metal spudger as shown in the picture. Move spudger along  to the other side until both snaps come loose.
    • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

    Aggiungi Commento

    • Picture shows the removed battery cover.

    Aggiungi Commento

    • Slide the battery out by pulling on one of two plastics tabs.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Yancey Crase

Membro da: 26/03/2018

217 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G4, Harley Spring 2018 Membro di IUPUI, Team S1-G4, Harley Spring 2018

IUPUI-HARLEY-S18S1G4

7 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 71