Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 8 mm Phillips #0 screws on the back cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grasp the white wire connector between the tabs and the socket.
-
Wiggle the connector back and forth to remove the front cover from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge the plastic opening tool into the crack between the plastic cover and microphone guard.
-
Use the wedge to separate the two pieces.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Twist the rubber casing and remove it from the plastic cover.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.