Logitech Webcam Pro 9000 Microphone Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

There are two parts to the microphone: the cover and the microphone and its casing. It takes about the same amount of time to remove the cover and the microphone.

Cosa ti serve

Passo 1 Front and Back Cover

Logitech Webcam Pro 9000 Microphone Replacement, Front and Back Cover: passo 1, immagine 1 di 2

Logitech Webcam Pro 9000 Microphone Replacement, Front and Back Cover: passo 1, immagine 2 di 2

Remove the two 8 mm Phillips #0 screws on the back cover.
The motherboard connects the two covers together. DO NOT separate the two yet.
There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

Traduci

Passo 2

Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
DO NOT detach the wire connecting the motherboard to the front cover.

Traduci

Passo 3 Microphone Connection

Logitech Webcam Pro 9000 Microphone Replacement, Microphone Connection: passo 3, immagine 1 di 2

Logitech Webcam Pro 9000 Microphone Replacement, Microphone Connection: passo 3, immagine 2 di 2

Grasp the white wire connector between the tabs and the socket.
Wiggle the connector back and forth to remove the front cover from the motherboard.

Traduci

Passo 4 Microphone

Logitech Webcam Pro 9000 Microphone Replacement, Microphone: passo 4, immagine 1 di 3

Logitech Webcam Pro 9000 Microphone Replacement, Microphone: passo 4, immagine 2 di 3

Logitech Webcam Pro 9000 Microphone Replacement, Microphone: passo 4, immagine 3 di 3

Wedge the plastic opening tool into the crack between the plastic cover and microphone guard.
Use the wedge to separate the two pieces.
It might take more force than expected.