Aggiusta la tua roba Comunità Store

Logitech G910 Keyboard Key Replacement

Introduzione

This guide will help you remove a key from the keyboard. You'll want to use a plastic or metal spudger to remove the keys from the keyboard.

Cosa ti serve

  1. Logitech G910 Keyboard Key Replacement, Key: passo 1, immagine 1 di 1

    • Unplug the keyboard cord from the computer.

    Traduci

  2. Logitech G910 Keyboard Key Replacement: passo 2, immagine 1 di 2 Logitech G910 Keyboard Key Replacement: passo 2, immagine 2 di 2

    • Turn the keyboard over and remove all the screws from the back.

    Traduci

  4. Logitech G910 Keyboard Key Replacement: passo 3, immagine 1 di 1

    • Using a metal spudger, gently slide it under the cover. Use your hand to add more pressure.

    • Be careful to not give too much pressure that could break the keyboard

    Traduci

  5. Logitech G910 Keyboard Key Replacement: passo 4, immagine 1 di 1

    • Turn the keyboard back and remove the screws from the front.

    Traduci

  6. Logitech G910 Keyboard Key Replacement: passo 5, immagine 1 di 1

    • Gently remove the key button from the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

13 Commenti

I am sorry, but why did you wrote a tutorial and describe how to open up G910 (and lose the warranty along the way) just to take of the keyCAP?

Keycap can be removed in a matter of seconds with use of $0.99 keycap removal tool

https://www.ebay.com/itm/Keyboard-Key-Ke...

heggathestrasni - Replica

It’s not just the Key Cap, you can remove the mechanical switch too. I have a busted G910 and I’ve been wanting to replace the switches for a while now.

Wildcard001 -

dude same, I have a few broken switches on mine that I'm keeping held together with some wadded up paper. the 9 key is completely gone sadly.

Shady Hero -

Rofl, you don’t need to do steps 1-4, literally jusst do 5 if you are replacing the keycap lmao

rob.chan - Replica

I think step 3 and 4 are in the wrong order, you can’t get to the screws until you get that face-plate off

Brett Yoakum - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 20

Ultimi 7 Giorni: 146

Ultimi 30 Giorni: 565

Tutti i Tempi: 59,954