Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Logitech G700s Side Button Array Replacement

Cosa ti serve

  1. Logitech G700s Side Button Array Replacement, Top Case Replacement: passo 1, immagine 1 di 1
    • Remove the batteries from the mouse.

    • Use a plastic opening tool to peel up the four mouse feet.

  2. Logitech G700s Side Button Array Replacement: passo 2, immagine 1 di 2 Logitech G700s Side Button Array Replacement: passo 2, immagine 2 di 2
    • Remove the five 5.5mm Phillips #00 screws found underneath the mouse feet.

  3. Logitech G700s Side Button Array Replacement: passo 3, immagine 1 di 3 Logitech G700s Side Button Array Replacement: passo 3, immagine 2 di 3 Logitech G700s Side Button Array Replacement: passo 3, immagine 3 di 3
    • Pull the top of the mouse off of the bottom half.

    • There's a wire connecting the two halves.

    • Unplug the programmable buttons from the motherboard.

    • The white pin housing on the motherboard may come off while unplugging. In that case, use tool to pry between at location indicated to separate them and insert the housing back onto the motherboard.

  4. Logitech G700s Side Button Array Replacement, Programmable Side Buttons: passo 4, immagine 1 di 3 Logitech G700s Side Button Array Replacement, Programmable Side Buttons: passo 4, immagine 2 di 3 Logitech G700s Side Button Array Replacement, Programmable Side Buttons: passo 4, immagine 3 di 3
    • Remove the three 5.5mm Phillips #00 screws holding the button assembly to the mouse.

    • Do not remove any of the screws on the circuit board, only the ones holding the plastic assembly in place

  5. Logitech G700s Side Button Array Replacement: passo 5, immagine 1 di 3 Logitech G700s Side Button Array Replacement: passo 5, immagine 2 di 3 Logitech G700s Side Button Array Replacement: passo 5, immagine 3 di 3
    • Disconnect the button board from the motherboard and remove the whole assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team S2-G3, Nance Spring 2018 Membro di USF Tampa, Team S2-G3, Nance Spring 2018

USFT-NANCE-S18S2G3

4 Membri

15 Guide realizzate

2 Commenti

Greetings, Is the quad side button assembly still avail. for replacement?

Doesn't appear when checking the parts item for this replacement build.

Thanks.

C McDonald - Replica

Would like to know about side button assembly availability also.

derekod18 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 37

Tutti i Tempi: 3,130