Aggiusta le tue cose Community Store

Logitech G X56 HOTAS Throttle Label Plate Replacement

Introduzione

The label plate on the Logitech G X56 HOTAS Throttle covers several internal components, including toggle switches and their mounting points on the base plate. To access and replace any of these switches, the label plate must first be removed. This guide will walk you through the process of safely detaching the label plate without damaging the surrounding housing or connectors. Take care during removal, as the plate may be secured with adhesive or alignment clips that require gentle prying.

Cosa ti serve

  1. Logitech G X56 HOTAS Throttle Label Plate Replacement, Bottom Panel: passo 1, immagine 1 di 1

    • Place the throttle upside down with the bottom panel facing up.

    Modifica

  2. Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 2, immagine 1 di 2 Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 2, immagine 2 di 2

    • Remove the fifteen 13.6 mm Phillips #1 screws that secure the bottom panel to the base plate.

    Modifica

  3. Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 3, immagine 1 di 2 Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 3, immagine 2 di 2

    • Remove the bottom panel by lifting straight up.

    Modifica

  5. Logitech G X56 HOTAS Throttle Label Plate Replacement, Label Plate: passo 4, immagine 1 di 2 Logitech G X56 HOTAS Throttle Label Plate Replacement, Label Plate: passo 4, immagine 2 di 2

    • Remove the eight 8.6 mm long 1.5 mm hex screws from the label plate.

    Modifica

  6. Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 5, immagine 1 di 1

    • Use an opening tool to pry off the mode switch knob.

    Modifica

  7. Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 6, immagine 1 di 3 Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 6, immagine 2 di 3 Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 6, immagine 3 di 3

    • Remove the eight 12.5 mm long Phillips #1 screws from the underside of the label plate.

    • These screws are plastic! Be very careful when applying force.

    Modifica

  8. Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 7, immagine 1 di 2 Logitech G X56 HOTAS Throttle Label Plate Replacement: passo 7, immagine 2 di 2

    • Place the throttle right side up again, using the bottom panel as a coaster.

    • Gently pry the label plate from the body of the throttle.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 28

Tutti i Tempi: 136