Logitech Extreme 3D Pro Joystick Trigger Replacement
Introduzione
Vai al passo 1After a long use the joystick trigger might experience a lack of strength within the trigger's internal spring.
Cosa ti serve
Strumenti
-
-
Remove these three Phillips #1 screws:
-
Two 10mm screws.
-
One 7mm screw.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.