Aggiusta la tua roba

Diritto alla Riparazione

Store

Lite FX Rotating Big Ball of Lite Model 1929 Switch Replacement

Scritto Da: Courtney Elliott (e 9 altri collaboratori)
  • Commenti: 0
  • Preferiti: 1

Difficoltà

Moderato

Passi

3

Tempo Necessario

15 - 30 minuti

Sezioni

1

Contrassegni

0

Introduzione

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

  1. Unplug the device to avoid injury. Use a Phillips head screwdriver to unscrew the single screw.

    • Unplug the device to avoid injury.

    • Use a Phillips head screwdriver to unscrew the single screw.

    • Hold on to the nut from the other side so you do not lose it.

    • Remove the panel that conceals the switch.

    Traduci

  3. Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

    • Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

    Traduci

  4. Remove and replace the white switch. Do not be afraid to pull as this takes a bit of force to remove.

    • Remove and replace the white switch.

    • Do not be afraid to pull as this takes a bit of force to remove.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 9 altri collaboratori

Courtney Elliott

Membro da: 14/01/2014

366 Reputazione

3 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team 17-3, Forte Winter 2014 Membro di Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Membri

7 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 564