Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide you will learn where the motherboard attaches to the router and how to separate the two components.
Cosa ti serve
-
-
Remove the rubber inserts inside the the two purple feet located on the router's front case.
-
This may be a challenge, so try the following two methods:
-
Use a plastic opening tool. Insert the flat end of the tool into the seam and slowly pry the rubber feet out.
-
Use a metal spudger. Insert the point of the metal spudger directly into the hole of the rubber feet and pry the insert out.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.