Parti

Nessuna parte richiesta.

  1. 3 Phillips screws are located under the battery cover, unscrew them
    • 3 Phillips screws are located under the battery cover, unscrew them

    Aggiungi Commento

  2. The mouse cover at the bottom should move freely but at the top is hold by 2 brackets
    • The mouse cover at the bottom should move freely but at the top is hold by 2 brackets

    • In order to remove the mouse cover, you will need to rock left/right the cover and slide it down (from scroll wheel toward the Lenovo logo)

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • At this point, you have separated the mouse cover

    Aggiungi Commento

    • Use the appropriate tool to remove gently the power connector. Don't use your finger, you might brake the cable

    Aggiungi Commento

    • The micro switch can be replaced by OMRON D2FC-F-7N but you need to trim the solder terminals with a flush wire cutter

    • When you reassemble the mouse, make sure you don't crush the power cable

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Shinn Chyang Chen

Membro da: 14/09/2011

2.104 Reputazione

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 47

Tutti i Tempi: 2,761