Salta al contenuto principale

Introduzione

This repair guide will demonstrate the process of removing the back cover for the Lenovo Yoga 900-13ISK laptop. The bottom case is responsible for keeping dust and debris from interfering with the internal componentry of the laptop. If the bottom of your laptop case has been dented or damaged, replacing the cover will keep your components safe.

Removing the back cover will also allow you to access the inside of the Lenovo Yoga 900 in the case that you need to repair or replace a component, and is the first step in most repairs for this device.

Be sure to unplug and completely turn off your device before you start working.

Parti

Nessuna parte specificata.

  1. Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop. Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop.
    • Using a T5 Torx screwdriver, remove the ten 5.5 mm screws from the back case of the laptop.

  2. Use a spudger to pry open the back case at the hinges of the laptop. There are plastic clips around the perimeter of the case holding down the back cover. These will need to be popped off as the cover is removed. Use your fingers to completely pop off the back cover.
    • Use a spudger to pry open the back case at the hinges of the laptop.

    • There are plastic clips around the perimeter of the case holding down the back cover. These will need to be popped off as the cover is removed.

    • Use your fingers to completely pop off the back cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Austin Blakely

Membro da: 11/03/2019

8.313 Reputazione

46 Guide realizzate

Team

iFixit Membro di iFixit

Community

137 Membri

16.049 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 24