Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Power off the device before starting.
-
Flip the device over with the hinges facing away from you.
-
Remove seven 5.0 mm Torx T5 screws.
-
Remove three 9.5 mm Torx T5 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry around the edges from one side to another with a plastic opening tool.
-
Lift the case from the front until you feel resistance.
-
Pull the cover towards you, away from the hinges.
-
Completely lift off the cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the foam covering the connecting wires and screw, and use the Phillips #0 screwdriver to remove the 2mm screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the adapter from both sides and pull towards the hinge to remove the adapter from the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the black and white wires from the adapter by pulling up on each wire.
-