Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • There will be 7 Philips head screws on the bottom which will need to be removed to gain access to the battery

    • NOTE: You may void your warranty completing this replacement

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • There will be 2 other Philips screws under the cover there should also be two arrows pointing at each screw that needs to be removed.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 2 : passo 3, immagine 2 di 2
    • Pull up the battery slightly by the tab and pull back

    • Remove the connector from the motherboard and pull the battery up and away from the board

    • Make sure not to pull all the way back as the battery is still connected to the motherboard

    • The computer may not boot when you try to turn it on, plug it into its power supply and it should boot.

Linea Traguardo

Altre 4 persone hanno completato questa guida.

Corey Meyer

Membro da: 05/01/17

2.268 Reputazione

2 Guide realizzate

Team

Kid fixers Membro di Kid fixers

Community

158 Membri

294 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 24

Tutti i Tempi: 3,071