Salta al contenuto principale

Parti

  1. First of all, you should have backed up your personal data, for example to an external USB drive, in particular your My Documents etc or /home Switch off, close the lid and turn the computer over.
    • First of all, you should have backed up your personal data, for example to an external USB drive, in particular your My Documents etc or /home

    • Switch off, close the lid and turn the computer over.

    • On the left side, identify the screw with a cylinder symbol next to it. This retains the hard disk cover.

  2. Remove the screw from the disk drive bay cover. Remove the cover, lifting it and gently pulling it to the left. Pull on the black plastic tab to extract the hard drive.
    • Remove the screw from the disk drive bay cover.

    • Remove the cover, lifting it and gently pulling it to the left.

    • Pull on the black plastic tab to extract the hard drive.

  3. Remove the protective rubber side pieces. Remove the four screws from the sides. Remove the drive from the enclosure.
    • Remove the protective rubber side pieces.

    • Remove the four screws from the sides.

    • Remove the drive from the enclosure.

    • You are ready to put your SSD in the enclosure.

Conclusione

To reassemble your PC , proceed in the reverse order

Altre 5 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

fr en

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Ludovic

Membro da: 18/09/2017

422 Reputazione

2 Guide realizzate

Team

Francophones Membro di Francophones

Community

20 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 49

Tutti i Tempi: 2,372