Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Users will learn how to remove the bezel from a Lenovo Thinkpad x230.

  1. Before you begin, be sure to turn off your laptop and unplug it from the outlet.
    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

  2. Flip the computer upside down.
    • Flip the computer upside down.

    • The red rectangle shows the location of the battery.

  3. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.
    • Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.

  4. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.
    • Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.

  5. Remove the plastic screw covers with an iFixit opening pick.
    • Remove the plastic screw covers with an iFixit opening pick.

  6. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.
    • Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.

  7. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick.
    • Carefully remove the plastic bezel cover using an iFixit opening pick.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Lino Virgen

Membro da: 10/10/2016

815 Reputazione

3 Guide realizzate

Team

Texas Tech, Team 6-3, Bennett Fall 2016 Membro di Texas Tech, Team 6-3, Bennett Fall 2016

TTU-BENNETT-F16S6G3

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 47

Tutti i Tempi: 4,272