Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Make sure to power down and turn off your device before proceeding with the repair.
-
Flip your laptop over so that the backside is facing you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
-
Don’t try to force screws which won't come out. They are held in place by a stopper on the reverse side. This will not prevent you from removing the backplate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #1 screwdriver to remove the three screws holding in the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the spudger to lift the battery out of it's compartment.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unclip the battery from the device.
-
Remove the battery from the device.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.