Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Spudger$2.99-
Use a Spudger tool to remove the screw covers on each side of the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a magnetic screwdriver fit with a PH0 Bit, unscrew the two screws and carefully set the aside.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry open the bezel carefully with the spudger tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all exposed screws and carefully set them aside. There should be 6 visible screws.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the screen up carefully, and remove the screws on both sides of the panel. There should be 4 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the connector located at the very top of the screen beside the webcam.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Fold the panel over until a strip of black tape is visible.
-
Peel the tape down until you get to the base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the connector carefully with the spudger tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the black tape fully.
-
Now your device is ready for a new panel.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Un commento
What can be used as a replacement screen, as it's listed not for sale?