Introduzione

This guide will show you step-by-step how to safely remove your hard drive. The hard drive is a device that stores information for your laptop.

Parti

Nessuna parte richiesta.

  1. Remove the 8 screws that hold down the back panel using the Phillips #000 screwdriver.
    • Remove the 8 screws that hold down the back panel using the Phillips #000 screwdriver.

  2. Remove the two M2 x 3 mm, wafer-head, nylon-coated screws that hold down the hard  drive assembly using the Phillips #0 screwdriver.
    • Remove the two M2 x 3 mm, wafer-head, nylon-coated screws that hold down the hard drive assembly using the Phillips #0 screwdriver.

    • Pull the hard drive assembly out with backside up.

    • Remove the four M3 x 3 mm, flat-head, nylon-coated screws on the side of the hard drive assembly using the Phillips #0 screwdriver.

    • Gently, remove the plastic cover with the blue strips.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 245