Salta al contenuto principale

Introduzione

In order to remove and replace the power button on your tablet, a soldering iron will be needed.

Ricambi

Nessuna parte specificata.

  1. Use a plastic opening tool to pry open the back cover of the tablet. Use a plastic opening tool to pry open the back cover of the tablet.
    • Use a plastic opening tool to pry open the back cover of the tablet.

  2. The power button strip is only held in place by a small piece of double-sided tape.
    • The power button strip is only held in place by a small piece of double-sided tape.

    • Gently use the precision tweezers to separate the power button strip from the interior frame of the tablet.

  3. Be careful with the soldering iron to avoid injury.
    • Be careful with the soldering iron to avoid injury.

    • Remove the power button from the motherboard.

    • Use the soldering iron to heat up the connections. Gently pull away from the motherboard after connections are detached.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

USF Tampa, Team 12-6, Eyestone Spring 2016 Membro di USF Tampa, Team 12-6, Eyestone Spring 2016

USFT-EYESTONE-S16S12G6

4 Membri

10 Guide realizzate

Un commento

Thank you for making this helpfull instrutions.

Where i can get the Buttons?

Simon - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 51

Tutti i Tempi: 5,072