Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Power down the Chromebook before starting any repair. Opening up your Chromebook voids the manufacturer warranty.
    • Power down the Chromebook before starting any repair.

    • Opening up your Chromebook voids the manufacturer warranty.

    • Use a screwdriver to remove the six 5.0mm Phillips screws from the bottom housing of the Chromebook.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a plastic opening tool to pry off the four rubber pegs from the bottom housing. Use a plastic opening tool to pry off the four rubber pegs from the bottom housing.
    • Use a plastic opening tool to pry off the four rubber pegs from the bottom housing.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a screwdriver to remove the four 5.0mm Phillips screws located under the rubber soles. Use a screwdriver to remove the four 5.0mm Phillips screws located under the rubber soles.
    • Use a screwdriver to remove the four 5.0mm Phillips screws located under the rubber soles.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Flip the laptop over and open the screen. Gently pry the keyboard and trackpad panel away from the bottom housing using a plastic opening tool. Once completely separated, do not immediately pull the panel completely away from the bottom housing. There are wires that are still connecting the panel to the rest of the internals of the Chromebook.
    • Flip the laptop over and open the screen.

    • Gently pry the keyboard and trackpad panel away from the bottom housing using a plastic opening tool.

    • Once completely separated, do not immediately pull the panel completely away from the bottom housing. There are wires that are still connecting the panel to the rest of the internals of the Chromebook.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Disconnect the keyboard ribbon cable by lifting the ZIF connector lock with a plastic opening tool or fingernail and gently pulling the ribbon cable straight out of its socket. Disconnect the keyboard ribbon cable by lifting the ZIF connector lock with a plastic opening tool or fingernail and gently pulling the ribbon cable straight out of its socket.
    • Disconnect the keyboard ribbon cable by lifting the ZIF connector lock with a plastic opening tool or fingernail and gently pulling the ribbon cable straight out of its socket.

  6. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora
  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Disconnect the trackpad ribbon cable by lifting the ZIF connector lock with a  small prying tool or fingernail and gently pulling the ribbon cable straight out of its socket. Disconnect the trackpad ribbon cable by lifting the ZIF connector lock with a  small prying tool or fingernail and gently pulling the ribbon cable straight out of its socket. Disconnect the trackpad ribbon cable by lifting the ZIF connector lock with a  small prying tool or fingernail and gently pulling the ribbon cable straight out of its socket.
    • Disconnect the trackpad ribbon cable by lifting the ZIF connector lock with a small prying tool or fingernail and gently pulling the ribbon cable straight out of its socket.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the keyboard and trackpad panel away from the device.
    • Remove the keyboard and trackpad panel away from the device.

  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully pry off the six small rubber pads around the screen with a plastic opening tool to expose the screws. There are two rubber pads without screws underneath that do not need to be removed.
    • Carefully pry off the six small rubber pads around the screen with a plastic opening tool to expose the screws.

    • There are two rubber pads without screws underneath that do not need to be removed.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the six 4.0mm Phillips screws  that are underneath the rubber pads with a screwdriver. Remove the six 4.0mm Phillips screws  that are underneath the rubber pads with a screwdriver.
    • Remove the six 4.0mm Phillips screws that are underneath the rubber pads with a screwdriver.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a plastic opening tool to carefully  pry the thin plastic frame away from the screen. The bottom edge of the frame has adhesive on it, and will take a little more power to peel away. Be careful not to bend the plastic too far or it will snap.
    • Use a plastic opening tool to carefully pry the thin plastic frame away from the screen.

    • The bottom edge of the frame has adhesive on it, and will take a little more power to peel away. Be careful not to bend the plastic too far or it will snap.

  12. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the four 3.0mm Phillips screws symmetrically placed on either side of the screen. Remove the four 3.0mm Phillips screws symmetrically placed on either side of the screen.
    • Remove the four 3.0mm Phillips screws symmetrically placed on either side of the screen.

  13. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Pull the cable connecting the motherboard to the screen straight out from the back of the screen. The screen is very fragile.  When handling it, avoid applying uneven pressure on or bending the screen.
    • Pull the cable connecting the motherboard to the screen straight out from the back of the screen.

    • The screen is very fragile. When handling it, avoid applying uneven pressure on or bending the screen.

  14. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the screen from the device.
    • Remove the screen from the device.

Linea Traguardo

Altre 5 persone hanno completato questa guida.

Lynette Cox

Membro da: 26/04/2017

715 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S21-G2, Livingston Spring 2017 Membro di Cal Poly, Team S21-G2, Livingston Spring 2017

CPSU-LIVINGSTON-S17S21G2

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 72

Tutti i Tempi: 2,352