Introduzione

This guide shows how to replace the WLAN & Bluetooth for the Lenovo N20p Chromebook. The guide shows how to remove the back panel, and remove the screws holding the WLAN & Bluetooth in place.

Power down the Chromebook before starting any repair.
  • Power down the Chromebook before starting any repair.

  • Remove the two 3.5 mm Phillips #0 screws using a screwdriver.

  • It is only necessary to remove these two screws to complete this step.

Aggiungi Commento

Use the hook of the metal spudger to carefully lift up the keyboard.
  • Use the hook of the metal spudger to carefully lift up the keyboard.

  • Lift the keyboard carefully. If you lift too quickly, it might break the two cables that connect the keyboard to the motherboard.

Aggiungi Commento

  • Carefully, disconnect the keyboard cable from the motherboard carefully by pulling on the blue tab of the cable.

  • You will now be able to replace the keyboard.

Aggiungi Commento

  • Remove the two rubber feet of the back of the Chromebook using a metal spudger.

  • Remove six bottom 3.5 mm Phillips #0 screws and two top 5 mm Phillips #1 screws.

Aggiungi Commento

  • Remove all nine 3.5 mm Phillips #00 screws using a screwdriver.

Aggiungi Commento

  • Disconnect the battery cable from the motherboard.

  • Disconnect the touch-pad cable from the motherboard.

Aggiungi Commento

  • Use the metal spudger along the seam between the keyboard and the bottom of the Chromebook to lift up and remove the palm rest assembly.

  • It is normal for it to click loudly when it is released. Corner tags will be harder to release than other tags and will make a loud sound.

Aggiungi Commento

  • Disconnect the USB cable from the motherboard by pulling the blue tab out of the cable.

  • Remove all five 3.0 mm Phillips #00 screws which connect the battery and motherboard.

Aggiungi Commento

  • Remove the battery.

  • It is helpful to lift and hold the battery as shown.

Aggiungi Commento

  • Disconnect the white and black cables from the WLAN & Bluetooth combo.

  • Remove the 2 mm Phillips #1 screw.

  • Lift and pull the WLAN & Bluetooth in the direction shown.

Aggiungi Commento

  • You will now be able to replace the WLAN & Bluetooth combo module.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Shihao Cao

Membro da: 12/07/2018

497 Reputazione

4 Guide realizzate

Team

UW Tacoma, Team S1-G2, Cardinal Summer 2018 Membro di UW Tacoma, Team S1-G2, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G2

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 43

Tutti i Tempi: 84